Brownells Donates $50K to CRPA for Standard Capacity Magazine Fight

Brownells Donates $50K to CRPA for Standard Capacity Magazine Fight

From Brownells

Brownells is donating $50,000 to the California Rifle & Pistol Association to help fund the fight to restore freedom and standard-capacity magazines to California gun owners.

In August, a three-judge panel of the United States Court of Appeals Ninth Circuit upheld a previous decision against California’s ban on magazines in the Duncan v. Becerra case. The panel determined a ban on magazines with capacity of over 10 rounds violates the 2nd Amendment rights of Californians.

In an effort to delay striking down California’s draconian magazine ban, the California Attorney General’s office petitioned for an en banc review of panel’s ruling, extending the struggle for California gun owners to regain their Constitutionally-guaranteed rights.

To help see that struggle through to a victorious finish, Brownells is contributing $50,000 for CRPA’s efforts to the cause.

“The California Rifle & Pistol Association Foundation is proud of the partnership with Brownells to fight for the rights of all Americans to exercise their Second Amendment rights,” said CRPA Foundation Director of Development Rick Travis. “Brownells’ generous donation will be used 100% in the fight to see the Duncan v. Becerra case to a successful conclusion in restoring the Second Amendment in California.”

If the rulings against California’s magazine ban are upheld, they could serve as precedent in similar decisions against other similar bans enacted by anti-gun politicians in other states.

SIG SAUER Limited Edition P220 LEGION CARRY SAO

SIG SAUER Limited Edition P220 LEGION CARRY SAO

From SIG SAUER

SIG SAUER, Inc. is pleased to announce the addition of the P220 LEGION CARRY SAO (.45 cal) to the exclusive SIG SAUER LEGION Series product line of pistols.

“The introduction of the P220 LEGION CARRY SAO is both a unique and exclusive opportunity and brings several firsts to the market for our LEGION Series pistols. Most notably this is the first introduction of both a carry size pistol and the availability of a .45 caliber for a LEGION Series pistol,” said Tom Taylor, Chief Marketing Officer, and Executive Vice President, SIG SAUER, Inc. “Additionally, this is a rare opportunity to either become a member of the exclusive SIG SAUER LEGION or expand your collection as a current LEGION member, due to the n fact that this is a limited run pistol.”

The SIG SAUER P220 LEGION CARRY SAO is a carry-size .45 caliber, hammer-fired pistol, featuring a Legion Gray stainless steel slide and frame, with X-RAY3 Day/Night Sights, single action only flat trigger, and ambidextrous manual safety. LEGION enhancements include a solid steel guide rod, enhanced checkering on the front strap and under the trigger guard, front cocking serrations for easy slide operations, black G-10 checkered grips with LEGION medallion inset on the grips, LEGION Chevron engraved on the slide, and includes three (3) 8-round magazines.

P220 LEGION CARRY SAO Specs:

Overall Length: 7.1 in.

Overall Height: 5.5 in.

Overall Width: 1.5 in.

Barrel Length: 3.9 in.

Sight Radius: 5.7 in.

Weight (incl. magazine): 30.4 oz.

By registering a SIG SAUER LEGION Series pistol owners become a part of the SIG SAUER LEGION. This includes members-only access to free gear and premium merchandise, in addition to exclusive LEGION Member-only communications and events. To learn more about the SIG SAUER LEGION visit sigsauer.com.

Contact your local SIG SAUER retailer for the availability of this limited run SIG SAUER P220 LEGION CARRY SAO. Complete product specs and information for the P220 LEGION CARRY SAO are available at sigsauer.com.

Wire Reticle Vs. Etched Glass

Wire Reticle Vs. Etched Glass

By Guy J. Sagi

Today’s riflescopes are modern marvels, with engineers cramming more advanced technology into compact, rugged and combat-proven riflescopes than ever before. The performance is undeniable, but is there a performance loss in an old-school wire reticle vs. etched glass versions?

The dedication of today’s manufacturers shows in the quality, but information on their construction and effect on light transmission is relatively scarce. Thankfully, several experts were eager to fill in some of those blanks.   

Wire Reticle Vs. Etched Glass

The reticle makes its home inside the scope’s tube, hidden somewhere between the headline-grabbing objective and eyepiece. Today, that crosshair—or point of aim—is usually wire or etched glass.

“If you just want a simple, easy to use reticle without clutter, then a wire-type reticle is what you seek—least expensive of the reticle options,”Tom Moyle, Leupold & Stevens Gold Ring Project Manager explained in an e-mail. Acquisition is fast, but the thicker size covers more of the target. “If you want intricate markings to use for holdover (elevation and windage), range estimating, measuring, then a glass reticle is for you.”

“All Nightforce reticles are [laser] etched on precision multi-coated compound glass,” said Wayne Dayberry, Nightforce Optics marketing specialist. “This ensures exact alignment and eliminates breakage. Other reticle technologies tend to wear and/or lose their accuracy over time due to the physical limitations of their construction.”

Jon LaCorte, co-founder of Tract Optics has a different opinion, though. “There are thoughts that the glass-etched reticle is more durable as there is nothing to break like can happen with a wire reticle,” he explained, “however, in the almost 20 years that I am in the riflescope business, service-related issues with reticles would not significantly support this.”

Losing Game?

“If there is a glass reticle installed, then yes, a small amount of light transmission could be lost, Moyle said. “If you have a wire reticle installed, then no light transmission will be lost through that portion of the scope.”

The companies work tireless to minimize the effect, though. “Nightforce optical prescriptions and riflescopes are built to push image resolution and light transmission to the edge of what is physically possible,” Dayberry said. “The inclusion of smart reticle technology which incorporates intelligent information embedded within the reticle does not impede optical performance.”

Where the Experts Do Agree

Not everyone needs or wants a complicated, first-focal-plane reticle with range estimation. A simple dot is CQB fast and effective. The duplex design—where point of aim is at the intersection the horizontal and vertical lines—remains popular for its simplicity and the stadia lines draw your eyes to the crosshair.

A projectile’s trajectory begins to drop at distance, though, so companies developed bullet-drop-compensating versions with marks that reflect point of impact at known distances under ideal conditions. Leupold’s 300 Blackout reticle provides holdovers for sub-sonic loads out to 400 yards and 900 yards with supersonic ammo. It’s available with a lighted semi-circle at the center for quick target acquisition and has windage hash marks. The company’s CMR-W 7.62 is tailored for 7.62 NATO/.308 Win. owners, and with a 50-yard zero, provides holdovers out to 1,200 meters with windage adjustment up to 20 mph.

Tract’s MRAD reticle allows accurate ranging, but its design isn’t chambering-specific. With practice and patience, the version’s .5 milliradian (MRAD) increments with larger hashmarks at each mil allows shooters to dial into their specific load and barrel length for a host of environmental conditions.

Nightforce has plenty of simpler options, but it’s best known for sniper systems, including the Horus H59 reticle. It provides moving target, windage, range, speed shooting elevation holds and more. Be forewarned, though, the 12 horizontal lines, 120 horizontal hash marks on the main stadia and additional holds to engage effectively out to 1,500 meters are intimidating at first. The company’s TReMoR 2 is similarly versatile, and despite its slightly different design, probably also capable of bringing in the cat and taking out the trash at night.

When Buying

If you’re choosing a new riflescope and considering all the different reticle options, technology and precision manufacturing have leveled the longevity playing field between a wire reticle and etched glass versions. The big difference, though, is the amount of detailed information the latter can provide.

The final decision is yours, but if you’re all about precision at long distance, etched is a good choice. If you’re never shooting past 1,000 meters or rarely have time to dope the wind anyway, you might save some cash and stay wired.

And, there’s a whole new breed out there now with a different flavor of reticle that relies on batteries and a display. The Sightmark Wraith features night vision, and a host of different “crosshair” options. The video below gives you a quick look at its on-screen reticles.

SneakyHunter Hiker Bootlamps

SneakyHunter Hiker Bootlamps

From SneakyHunter

SneakyHunter Hikers Bootlamps – essentially, headlamps for your feet – eliminate many of the problems with conventional headlamps and hand-held flashlights. When wearing a headlamp, talking to your companions becomes an issue when you face them and inadvertently blind them by shining your light directly into their eyes, destroying their night vision for up to 45 minutes. Also, many hikers face depth perception issues when using a light source above the waist.

SneakyHunter Hiker Bootlamps are a unique invention, not a knockoff of a product already on the market, and are perfect for a myriad of outdoor activities by providing new solutions to common problems experienced with headlamps and flashlights. They stabilize your visual perception by keeping the light low to the ground. They place your lighting as far from your face as possible, offering more relief on your eyes. The lights operate using three AAA batteries and have three settings – white, for general hiking; red, for hiking with a soft light that will not spook animals; and green, which offers less eyestrain over time. You activate them by simply pushing the button on top – one click for white, two clicks for red, three clicks for green. The lid is rated as highly water resistant. They’re attached to your boot via an easy-to-use 18-inch long, 1-inch wide elastic cinch strap. The hook and loop strap is placed under your instep, and the two prongs on the front of the unit are slipped under your boot or shoelaces, resulting in a slip-proof attachment. The unit is made so that when it is mounted in the proper position, the light will shine where you’ll be walking.

Originally designed to be put directly on the boot, the SneakyHunter Bootlamps also work well when strapped on the knees. This directs the light where you are walking and is ideal in situations when walking in water, snow or other inclement ground situations.

Avid outdoorsmen and entrepreneurs Jim and Annette Manroe wondered why isn’t there a lighting system that solves the obvious problems with headlamps and flashlights? It was when he was reviewing the reason he often spooked elk when hiking in the dark that Jim had an idea. “SneakyHunter Bootlamps were first conceived when I spent time in the offseason reviewing my unsuccessful hunts,” Manroe said. “I realized there were missed opportunities from my headlamp illuminating the eyes of big game, or generally disturbing them with scattered light when I inadvertently flashed them.” The solution? A lighting system that allowed Jim to turn his head without shining his light in that direction.

Whether you’re hiking up and down the mountain or along the trail, going for your morning walk before dawn, walking your dog, gathering firewood, or any other in-the-dark outdoor activity, SneakyHunter Hikers Bootlamps are the perfect lighting solution. One creative customer even uses them while snowshoeing in the dark, while another wears hers as an armband when walking her dog so that approaching vehicles can easily see her.

Made in the USA, available colors include white, red, and green (Hikers Bootlamps), and white, red, and violet (Hunters Bootlamps.) MSRP is $59.99 for two bootlamps, and they come with a one year limited warranty. More information is available at www.sneakyhunter.com.

SPECS

Bulb Type: 5mm LED

Bulb Detail: x6 LED (x2 each mode)

Beam Type: Flood

Max Light Output: 50 Lumens per Bootlamp

Max Beam Distance (ft.) 50 meters

Modes: White, Red, Green,

Average Run Time: 70 hours

Batteries: 3 AAA each (not included)

Dimensions: 2.875” wide x 2.0” long x 1.75” high

Weight with Batteries: 2/7 oz. each

Pyrm 1 Camo Partners with Tatonka NZ on New Stealth Packs

Pyrm 1 Camo Partners with Tatonka NZ on New Stealth Packs

From Tatonka NZ

Tatonka NZ recently launched their brand new line of Prym1 Woodlands Stealth Packs to the NZ outdoor/hunting market.

“Since their introduction, we have had amazing feedback about our game-changing Tatonka Stealth packs. However, a common request we’ve received since their launch is for a camo pattern. We are excited to now deliver this with the introduction of our new Prym1 Woodlands Camo Stealth Packs!” – Tatonka NZ

“As part of our continued global expansion, we’re really excited to partner with Tatonka, an outdoor ‘powerhouse brand’ that are renowned as experts in producing the most rugged, highest quality packs, tents and other outdoor accessories.

Decades of outdoor experience can be found in Tatonka products. They develop, manufacture and test the products themselves – and deliver them all over the world. They then receive valuable feedback from their customer’s, which flows directly back into their product development. So, when they came knocking on our door for a game-changing concealment pattern to take their product to the next level, we truly delivered. The Prym1 Woodlands is built for the bush, and NZ hunter’s can rest assured that they will be concealed in our camo when they need it most.” – Stacie Walker, Prym1 Camo.

These packs were designed specifically for New Zealand stalking conditions, with a soft, quiet fabric and all the essential features. The new Prym1 Woodlands camo print has taken the level of stealth to a new level, ensuring these packs are truly the ultimate stalking companion.

The full range:

– Bison Stealth 75+10L

– Stealth Hunting Pack 35+10L

– Stealth Hunting Pack 30L

– Stealth Hunting Pack 20L

Unlike other daypacks, these packs are capable of carrying decent loads.

The Bison range of packs are virtually bombproof and capable of carrying heavy loads over 25kg in comfort thanks to the X1 carrying system that was originally designed for the German military. The 75+10 litre size is ideal for longer hunting trips where you need plenty of gear.

The Stealth 35+10 designed to comfortably carry loads up to 35kg, which means it is perfect for the roar and meat harvesting trips. The decent sized front pockets on the 35+10 mean you can move all your gear into the front pockets and use the main compartment for meat storage when required. It is specifically designed so the pack can be laid flat and the space between the front pockets can be used as a shooting rest.

The Stealth 30L is designed to be able to carry 20kg in comfort, so you can easily carry meat out if your hunting trip is successful. The Stealth 20L is the ideal daypack for the hunter where light weight is the priority. This pack is also designed so it can be rolled up and attached to a Tatonka Bison 75+10 or 90+10 pack.

All packs in this range are equipped with RECCO® reflectors, part of the RECCO® rescue system that helps to locate people in rescue situations.

NCLA Earns En Banc Review in 10th Circuit Bump Stock Ban Case

NCLA Earns En Banc Review in 10th Circuit Bump Stock Ban Case

From the New Civil Liberties Alliance

The New Civil Liberties Alliance, a nonpartisan, nonprofit civil rights group is celebrating a reprieve today in the case of Aposhian v. Barr, et al. after the U.S. Court of Appeals in the Tenth Circuit vacated the panel decision and granted NCLA’s petition for rehearing en banc. NCLA is challenging the ban on bump stocks issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) that went into effect on March 26, 2019.

The panel decision had created a deep split among the circuits when it denied Mr. Aposhian’s appeal 2-1 in May, but it also broke ranks with prior decisions of the Tenth Circuit itself and with the U.S. Supreme Court. Chevron should not be applied to defer to an agency’s statutory interpretation when, as here, the government waives any reliance on it. Contrary to the panel decision in this case, three other circuits have held that Chevron deference is not a standard of review but is instead just one tool for statutory interpretation—and is thus subject to waiver.

The en banc court will also consider whether it should apply the constitutionally required Rule of Lenity instead of Chevron deference when agency action has both criminal and civil application. The now-vacated panel opinion had held that Chevron deference applied instead of the Rule of Lenity. This interpretation would violate fundamental due process considerations of notice and an opportunity to be heard. Although Mr. Aposhian is not charged with a crime, the statute he is challenging carries criminal penalties, so the Rule of Lenity applies.

Eleven active judges of the court will rehear the entire case afresh but will also specifically address the following questions, on which they have ordered supplemental briefing:

1. Did the Supreme Court intend for the Chevron framework to operate as a standard of review, a tool of statutory interpretation, or an analytical framework that applies where a government agency has interpreted an ambiguous statute?

2. Does Chevron step-two deference depend on one or both parties invoking it, i.e., can it be waived; and, if it must be invoked by one or both parties in order for the court to apply it, did either party adequately do so here?

3. Is Chevron step-two deference applicable where the government interprets a statute that imposes both civil and criminal penalties?

4. Can a party concede the irreparability of a harm; and, if so, must this court honor that stipulation?

5. Is the bump stock policy determination made by the Bureau of Alcohol, Tobacco and Firearms peculiarly dependent upon facts within the congressionally vested expertise of that agency?

NCLA released the following statements:

“The full Tenth Circuit has recognized the troubling consequences of the panel’s prior decision. Chevron deference cannot guarantee a win for an agency even when the parties agree it doesn’t apply, because it contradicts the constitutional rule that criminal laws should be construed against the government. We look forward to the Court setting a major precedent limiting Chevron’s unconstitutional reach.”

— Caleb Kruckenberg, Litigation Counsel, NCLA

“NCLA is grateful that the Tenth Circuit has recognized the importance of our client’s civil liberties at stake in this case. We are also delighted that the judges have decided to take a close look at several key Chevron-related issues that have surfaced. The bump stock ban illustrates some of the many problems with Chevron deference—including constitutional ones.”

— Mark Chenoweth, Executive Director and General Counsel, NCLA

Primary Arms Restocks GLx Rifle Scopes

Primary Arms Restocks GLx Rifle Scopes

From Primary Arms Optics

 Primary Arms Optics has announced the restock of two popular long-range GLx rifle scopes: the GLx 4-16x50mm FFP Rifle Scope with ACSS HUD DMR 308 Reticle and the GLx 6-24x50mm FFP Rifle Scope with Athena BPR MIL Reticle. These scopes are part of Primary Arms’ mid-tier optics line, GLx, which brings premium technology and materials into an approachable price range.

The GLx 4-16x50mm First Focal Plane (FFP) Rifle Scope with ACSS HUD DMR reticle is designed for superior agility when engaging targets from medium to long distance. With over 3.5” of eye relief and a 23.5oz weight, this optic is nimble when acquiring targets, though the 50mm objective lens still provides improved image quality when identifying a target in suboptimal lighting. These features are supported with the proven ACSS HUD DMR 308 reticle, which features advanced holdover and ranging designs to improve your speed and precision with 5.56×45, 6.8SPC, and .308 Winchester cartridges.

What’s the difference between a wire and etched-glass reticle?

The GLx 6-24x50mm FFP with Athena BPR MIL reticle outshines its competition in long-range marksmanship. Utilizing the patented GLx turret design, users can quickly adjust their elevation with remarkable tracking accuracy, and the locking turret feature allows for quick return to zero without overtravel. For faster engagements, users can leverage the Athena BPR MIL’s integrated ranging ladder and MIL-grid stadia. With full reticle illumination, this scope can provide clear holdovers from dawn through dusk.

“We’re excited to see the return of two of our most popular GLx rifle scopes,” says Terry Mears, Primary Arms’ Director of Sales and Product Marketing. “The GLx 4-16x50mm and 6-24x50mm platforms are among our top performers in long-range marksmanship. With the ACSS HUD DMR 308 and Athena BPR MIL reticles, users can fully leverage their scope’s technology for remarkable precision, even out to 1000 yards.”

With cutting-edge turret technology, intuitive reticle designs, and exceptional glass clarity, these scopes are built to compete with premium scopes without breaking the budget. To view and order these two scopes, visit the GLx product page on the Primary Arms site or through your preferred online retailer.

If you’re looking for an optic a little more CQB, take a look at the company’s 1-6 SLx.

Trijicon and Holosun Patent Suit Settled

Statement by Trijicon

The recent filing with the U.S. International Trade Commission by Trijicon, Inc., against Holosun Technologies, Inc., on reflex optic designs has been settled. Trijicon successfully defended its intellectual property around reflex sight features and technology.

“We invest heavily in research, development, and testing at Trijicon to ensure our optics are ready to perform for the most demanding users, and we are committed to defending that investment in innovation,” said Stephen Bindon, Trijicon President & CEO.

Statement by Holosun

Holosun Technologies, Inc. is pleased to have resolved the International Trade Commission filing and associated patent lawsuit initiated by Trijicon, Inc. in July.

“We look forward to spirited competition in the marketplace and continuing to create innovative products for professionals, competitors, and enthusiasts. The unique technologies packed into Holosun optical sights make aiming and shooting faster and more intuitive while providing unparalleled value to our customers,” said Holosun Business Manager Louis Craig.

Springfield Armory XD-M Elite 3.8” Compact

Springfield Armory XD-M Elite 3.8” Compact

From Springfield Armory

Springfield Armory is proud to announce the newest addition to the popular XD-M Elite series — the XD-M Elite 3.8″ Compact. This EDC-ready 9 mm, like all the XD-M Elites, redefines what you should expect from modern, striker-fired firearms.

The XD-M Elite 3.8″ Compact is designed for concealed carry, combining impressive capacity and performance with concealable dimensions for ease of carry. The 3.8″ match grade Melonite® finished barrel maximizes ballistic performance while remaining compact for concealability, and the compact grip frame houses a double-column stainless steel magazine that provides 14+1 capacity in the two included magazines.

How Long Will Polymer Handguns Last?

To facilitate quick reloads, the XD-M® Elite 3.8″ Compact also features a removable extended and flared “short” magwell. An additional benefit of the removable magwell is that you can quickly convert the pistol from a compact to a full-size frame with a 19+1 capacity. This is accomplished by simply removing the magwell and employing optional full-size XD-M magazines with compatible magazine sleeves.

At the heart of the pistol is the Match Enhanced Trigger Assembly (META™) system, a superbly refined trigger designed to wring out the most from the pistol’s most important interface with the shooter. Featuring a flat face and integral overtravel stop, the META™ system delivers the finest trigger pull available on a production polymer-framed pistol.

The XD-M® Elite 3.8″ Compact includes an ambidextrous slide stop and magazine release, ensuring that it can be run easily by either hand. Additionally, improved slide serrations with enlarged grasping grooves provide enhanced ergonomics and slip-free purchase. Topping off its forged steel slide is Springfield Armory’s excellent Tactical Rack U-Dot™ rear sight. It features a u-shaped white outline and works in concert with the high-visibility fiber optic front sight.

“This newest addition to the XD-M® Elite line of pistols gives shooters and concealed carry users a great option for EDC,” says Steve Kramer, Vice President of Marketing for Springfield Armory. “Features like the META™ trigger, fully ambidextrous controls and a funneled, removable magwell make the XD-M® Elite 3.8″ Compact a must-have for CCW.”

If you need a capable and powerful 9mm pistol that combines ultra-refined performance with concealable dimensions, then look no further than the new XD-M® Elite 3.8″ Compact.

To see the XD-M Elite 3.8” Compact | XDME9389CBHC, visit https://www.spr-ar.com/r/4257.

To see the entire XD-M Elite line, visit https://www.spr-ar.com/r/4256.

And if you haven’t seen it yet, the Springfield Hellcat is definitely worth a look.

Streamlight TLR-1 HL Dual Remote Switch Kit

Streamlight TLR-1 HL Dual Remote Switch Kit

If you’re one of the first-time gun owners who picked up a modern sporting rifle or shotgun for home defense, lighting is critical. This unit Streamlight introduced in January that could bolster your effectiveness in low-light encounters.

Here’s the company’s press release with full specs.

Streamlight, Inc., a leading provider of high-performance lighting and weapon light/laser sighting devices, launched the TLR-1 HL® Dual Remote Kit. The new kit, with included TLR-1 HL light, allows for the individual or simultaneous activation of the light and an external aiming device. With direct mounting to all MIL-STD-1913 (Picatinny) rails, the Dual Remote Pressure Switch permits momentary or constant activation. The company also introduced the TLR® Dual Remote Switch Accessory for use with the Streamlight TLR-1® and TLR-2® series lights and an accompanying external aiming device.

“Tactical users and outdoor enthusiasts who also want to use an external aiming laser can now do so, conveniently and easily, with the TLR-1 HL Kit or the TLR Dual Remote Switch Accessory,” said Streamlight President and Chief Executive Officer Ray Sharrah. “Both provide users with what they need, and have been requesting to connect to their TLR weapon mounted lights.”

The new TLR-1 HL Kit includes the TLR-1 HL weapon light with Safe Off Tail switch, lithium batteries, a Dual Remote Pressure Switch, and mounting clips. The TLR Dual Remote Switch Accessory includes a Dual Remote Pressure Switch for use with TLR-1 or TLR-2 series lights (sold separately) and mounting clips.

More and more companies are going wireless on their weaponlight and scope solutions, too. Here’s my look at the trend.

The TLR-1 HL Dual Remote Switch Kit and the TLR Dual Remote Switch Accessory have MSRPs of $351.63 and $75.00, respectively, and include Streamlight’s Limited Lifetime Warranty.

Today’s defensive lighting systems are way advanced to those from a few years ago. Here’s a look at what goes into today’s systems, and how we got here.