Blog

Posted on

Hatsan Introduces Multi-Caliber PCP Rifle: The Hydra

Hatsan Introduces Multi-Caliber PCP Rifle: The Hydra

From Hatsan

Yet another innovation from the Hatsan factory is their new Hydra QE. It features their patented Versi-Cal Technology interchangeable caliber system that allows one to trade calibers with a single thumb screw. The VCT system couples a caliber-specific receiver and barrel into a single interchangeable module that allows a scope to remain mounted and zeroed with each caliber used. A knurled screw located at the rear of the receiver locks the upper module onto the lower receiver, allowing caliber changes in just a few seconds. The Hydra QE utilizes Hatsan’s S/Roto-Index magazine system – a caliber specific self-indexing rotary magazine made from a lightweight-yet-durable synthetic polymer. Each module features Hatsan’s QuietEnergy shrouded barrel that reduces downrange noise by up to 50%.

A fourth module is also available that will allow shooters to use the rifle with commercially available crossbow arrows. This module features a hollow guide rod for the arrow to slide over. It accepts 20″ 2219 aluminum and carbon fiber arrows with a 0.30″ inside diameter. The same modular air rifle platform can now be used for target and small game hunting with pellets, then be swapped in seconds for larger game hunting without the need to buy another complete airgun.

A fine Turkish walnut stock is laser engraved with ample texturing on critical grip surfaces that enhances the feel and control of the rifle. A Monte Carlo style cheek rest rises up to just the right height for use with scopes. The rubber butt pad is both elevation and fit angle adjustable for a custom fit to each shooter. A fixed 165cc air cylinder fills to 2900 PSI and can provide up to 35 powerful shots. Weighing in at just 6.8 lbs, this modular platform airgun is easy to carry and shoot. The Hatsan Hydra is available in .177, .22, or .25 caliber – with additional barrel/receiver modules available separately.

Hydra QE Features:

  • Versi-Cal Technology (VCT) interchangeable caliber system
  • Manual loading, repeating, bolt-action Pre-Charged Pneumatic air rifle
  • Available in .177, .22, and .25 caliber – optional 20″ arrow module
    • Additional barrel / receiver modules available separately
  • QuietEnergy fully shrouded barrel with integrated sound moderator – approximately 50% quieter
  • Precision rifled and choked steel barrel
  • Detachable, caliber-specific, multi-shot, spring rotary magazine
  • Corrosion resistant black anodized aluminum receivers
  • Combination 22mm and 11mm dovetail rail accepts a wide range of optics mounts
  • Fine Turkish walnut stock with Monte Carlo cheek rest
  • Textured grip surfaces for better control and feel
  • Elevation and fit angle adjustable rubber butt pad
  • Fixed 165cc air cylinder
  • Built-in pressure gauge to monitor cylinder pressure
  • Patented anti-knock system prevents gas wastage when the gun is knocked or bounced
  • Quattro Trigger: 2-stage fully adjustable match trigger for trigger travel and load
  • Manual safety switch
  • MSRP: Starting at $449.99

Hydra QE Specifications:

  • .177 Caliber
    • Max Velocity: 1250 FPS
    • Max Energy: 29 Ft-lb
    • Number of Shots: 28-35
    • Magazine Capacity: 14
  • .22 Caliber
    • Max Velocity: 1120 FPS
    • Max Energy: 38 Ft-lb
    • Number of Shots: 24-30
    • Magazine Capacity: 12
  • .25 Caliber
    • Max Velocity: 900 FPS
    • Max Energy: 40 Ft-lb
    • Number of Shots: 20-25
    • Magazine Capacity: 10
  • Air Cylinder Volume: 165cc
  • Fill Pressure: 200 BAR (2900 PSI)
  • Overall Length: 42.7″
  • Barrel Length: 17.7″
  • Weight: 6.8 lbs

Hydra Arrow Module Features:

  • Part of the Versi-Cal Technology (VCT) interchangeable caliber system
  • Easily attaches to the Hydra lower receiver with a single thumb screw
  • Single-shot, arrow-firing, bolt-action Pre-Charged Pneumatic air rifle
  • Fires 20″ arrows
  • Corrosion resistant black anodized aluminum receivers
  • Combination 22mm and 11mm dovetail rail accepts a wide range of optics mounts

If that versatility isn’t enough, the company also recently introduced the world’s most powerful PCP rifle.

Posted on

CMMG BANSHEE and RESOLUTE Accept Sig Sauer M17/P320 Magazines

CMMG BANSHEE and RESOLUTE Accept Sig Sauer M17/P320 Magazines

From CMMG

CMMG spent years innovating the AR platform with the patented Radial Delayed Blowback operating system that has revolutionized the industry. The addition of the Mk17, chambered in 9mm, shows CMMG’s commitment to never settling. Accepting Sig Sauer™ M17™P320™ magazines, the Mk17 is available in both BANSHEE™ and RESOLUTE® configurations. Pair the BANSHEE or RESOLUTE with your existing M17/P320 and you have the convenience of magazine interchangeability.

Staying true to its innovative and industry-leading values, CMMG brings to market the Mk17 on the heels of the U.S. Army and Marine Corps adoption of the Sig Sauer M17/M18 service pistols. In November of 2019, Sig Sauer delivered its 100,000th M17/M18 handgun to the U.S. military and the number continues to rise. Those familiar with the platform now have a personal defense firearm (PDW) at their disposal. As hundreds of thousands of service members adopt a new pistol platform over the next 20-30 years, the CMMG Mk17 will be a great pairing to add to their arsenal.

For personal defense, the Mk17 is offered in the BANSHEE configuration of AR pistols and short-barreled rifles with various barrel lengths. For the competitive shooter, the Mk17 comes in CMMG’s RESOLUTE line of 16-inch barreled rifles.

The BANSHEE is offered as a pistol or short barreled rifle with barrel lengths of 5 inches or 8 inches, while RESOLUTE rifles comes with a 16 inch barrel. Both the BANSHEE and RESOLUTE feature Last Round Bolt Hold Open.

Each Mk17 ships with one 21-round magazine and a retail price ranging from $1,199.95 to $1,549.95 for the BANSHEE and $1,299.95 to $1,799.95 for the RESOLUTE (depending on series).

On all CMMG BANSHEE and RESOLUTE 300 Series firearms, consumers can choose from ten Cerakote colors at no additional cost. Both the 100 and 200 Series offer Cerakote for the complete firearm for an additional $150 per model.

For more information on the Mk17, please visit CMMGinc.com/Mk17.

And don’t forget to take a look at the CMMG AR in 6.5 Grendel.

Posted on

Bushnell Now Shipping Powerview 2 Binoculars

Bushnell Now Shipping Powerview 2 Binoculars

From Bushnell

Bushnell, an industry leader in performance optics, announced today that it has started shipping the Powerview 2, an evolution of their popular Powerview line of binoculars that have offered industry-leading value for over a decade.

A versatile, general-use binocular, Powerview 2 models feature an aircraft grade, aluminum alloy chassis built for durability without adding unnecessary weight and bulk. Each model sports high-quality, soft-touch black rubber armor and brushed metal texture finishes that give it an eye-catching modern exterior design and superior ergonomics.

Available now for purchase at prices ranging from $39.99 to $79.99, Powerview 2 fits within nearly everyone’s budget. The line offers compact, mid- and full-size options in roof or porro prism configurations ranging from 10x to 20x magnification. This wide assortment provides multiple options for any outdoor adventure.

Multi-coated optics provide a clear, vibrant image, even in low light. The focus wheel is designed for ultra-smooth performance, allowing the user to quickly focus on the subject and get exceptional definition. All Powerview 2 binoculars have an adjustable diopter, and come with soft-touch rubber armor that’s textured along the sides and on the bridge for easy handling and a confident grip.

Powerview 2 binoculars are available in the following configurations and prism systems: Compact 10x25mm folding roof prism, 16x32mm folding roof prism. Mid-size 10x42mm roof prism, and Full Size 10x50mm Porro prism, 12x50mm Porro prism and 20x50mm Porro prism. All models have fold-down eyecups except for the 10×42 roof prism model which has twist-up eye cups.

All mid and full size Powerview 2 models are tripod compatible. Available accessories include a tripod adapter and bino harness.

And if you missed it, Bushnell was named the official binocular of Realtree.

Posted on

Prep Before Storms Arrive this Summer Advises NOAA

Prep Before Storms Arrive this Summer Advises NOAA

From NOAA

This hurricane season is predicted to be a very active one. NOAA’s Climate Prediction Center is forecasting 13-19 named storms, 6-10 hurricanes and 3-6 major hurricanes. Please take this time to review your hurricane preparedness and evaluate your Critical Incident Disaster Plan, including a plan for what you and your family will do in the event you need to evacuate due to a natural disaster.

Here are a few things you can do right now to prepare:

  1. Know the hazards that are present in your area.
  2. Review your insurance policies and confirm you have adequate coverage against each type of disaster you are vulnerable to.
  3. Take a household and animal inventory and store copies in a safe location or online. Cataloging your belongings with a home inventory might sound tedious, but how easy would it be for you to recall all the contents of your home if you lost everything? Taking a home inventory can save you time and headaches when filing a claim following a disaster.
  4. Prepare a disaster plan. Your plan should start with having somewhere safe to go. Think of someone who could house you, your family and your wildlife. Talk to them about what might happen in the event of a disaster. Then talk to everyone who lives in your home about what to do if there is an emergency and you are unable to return in a timely manner.
  5. Have a communications plan. Consider that your family may not be together if a disaster strikes. How you will get to a safe place? How will you contact one another? How will you get back together? You will be better prepared to safely reunite your family and loved ones during an emergency if you think ahead and communicate with others in advance. Your family should have a list of emergency contact numbers they can phone.
  6. Have an evacuation plan. In some cases when you need to evacuate, there may not be a lot of time. Plan how to evacuate your home quickly and make sure everyone knows the evacuation plan.
  7. Supplies. In the event of a natural disaster please ensure that you have enough supplies to cover both your family’s needs as well as those of your wildlife.
  8. Practice the steps that are needed to disconnect your home’s gas, water, and electricity. Test your generators to ensure they are operational and have backup supplies.
  9. Before any disaster, you should inspect your home/facility and eliminate any potential hazards. In an emergency, ordinary items in your home can cause injury and damage. Anything that can move, fall, break, or cause a fire is a potential hazard.
  10. Community connections are important. Make sure you know your neighbors. Exchange phone numbers and keep an eye on elderly or disabled neighbors, or people with children – they might need extra help during a natural disaster. Have your Captive Wildlife Investigator’s phone number in the event of an escape or damage to your facility.

We encourage you to review your Critical Incident Disaster Plan. These plans ensure that you are proactive in preparing for any emergency event that could potentially disrupt the orderly operation of your facility and thus, adversely impact public safety.

Disasters happen, and the experts have some sound advice on how to prepare

Posted on

Primary Arms Releases GLx 30 mm and 34 mm Cantilever Riflescope Mounts

Primary Arms Releases GLx 30 mm and 34 mm Cantilever Riflescope Mounts

From Primary Arms

 Primary Arms Optics has released a brand new line of US-made riflescope mounts in their GLx tier. GLx products bring premium technology and materials into an approachable price range, and these mounts are built to outperform with top-quality components at a great value. Priced at $99.99, GLx Riflescope Mounts launch with 4 models to accommodate 30mm and 34mm scopes with a 0 or 20MOA cant. All four mounts are now available at primaryarms.com or from your favorite Primary Arms Optics retailer.

Made in the USA, every GLx mount features a durable 6061-T6 Aluminum alloy construction with MIL SPEC hard coat anodization for superior longevity, even in the most demanding conditions. The steel hardware comes with a black zinc phosphate coating that greatly improves corrosion and abrasion resistance. This superior hardware also contributes to the GLx mounts’ high torque allowance—with 25in-lbs for the T15 Torx cap screws and 65in-lbs for the 1/2” crossbolt hex nuts.

“This year we launched our mid-tier line of GLx optics. It’s only natural that we would bring a solid line of one-piece mounts along with them,” says Terry Mears, Primary Arms’ Director of Sales and Product Management. “We are fortunate to provide a high-quality, US-made mount for under $100, which can be used with any of our optics from SLx to PLx.”

As with all other Primary Arms GLx products, these mounts come backed with a full lifetime warranty and Primary Arms’ commitment to customer satisfaction.

Posted on

Precision Barrels and Slides for SIG P320 FCU and P365 from Rival Arms

Precision Barrels and Slides for SIG P320 FCU and P365 from Rival Arms

From Rival Arms

Rival Arms, manufacturer of high-quality, modular pistol components for do-it-yourself firearm enthusiasts, proudly announces their line of match-grade barrels, optic ready slides, guide rods, and slide completion kits for Sig Sauer® P320 and P365 firearms.

Rival Arms is quickly being recognized by firearm enthusiasts as the leading brand of quality aftermarket performance components. As the company expands its product line with multiple Sig Sauer platform options, the goal remains the same — to manufacture handgun components that exceed factory standards in material construction, precision tolerances, and durability.

Rival Arms will offer standard and threaded barrels for the Sig Sauer P365, P365 XL, P320 Carry, P320 Full Size, and P320 X5 pistols. All Rival Arms barrels start with a stainless-steel billet to deliver maximum durability and are then precision CNC-machined to exacting tolerances to ensure the greatest possible accuracy before being treated with a PVD coating. This coating provides exceptional wear and corrosion resistance and is available in black or gold colors. Threaded barrels come with 1/2-28 threads for use with popular aftermarket suppressors and compensators. A color-matching thread protector is included for use without muzzle devices.

Barrel Model Handgun Platform Muzzle Type Color

RA20P501A P320 X5 STANDARD BLACK

RA20P501E P320 X5 STANDARD GOLD

RA20P401A P320 FULL SIZE STANDARD BLACK

RA20P401E P320 FULL SIZE STANDARD GOLD

RA20P301A P320 CARRY STANDARD BLACK

RA20P301E P320 CARRY STANDARD GOLD

RA20P302A P320 CARRY THREADED BLACK

RA20P302E P320 CARRY THREADED GOLD

RA20P101A P365 XL STANDARD BLACK

RA20P101E P365 XL STANDARD GOLD

RA20P001A P365 STANDARD BLACK

RA20P001E P365 STANDARD GOLD

RA20P002A P365 THREADED BLACK

RA20P002E P365 THREADED GOLD

The Rival Arms slides for the P365 and P320 (Full Size and Carry available) are CNC-machined from 17-4PH stainless steel billet and QPQ thermo-chemical case hardened to deliver maximum strength, corrosion resistance, and durability. Robust serrations and window cuts enhance operational performance and appearance. For those intending to use optics, the Rival Arms slides come ready with either an RMR® cut or “other” cut suitable for a range of popular handgun optics (Docter®/Noblex®, TRUGLO®, Vortex®, Burris®, etc.)

Slide Model Fit Optic

RA10P401A P320 FULL SIZE RMR®

RA10P402A P320 FULL SIZE OTHER OPTIC

RA10P301A P320 CARRY RMR®

RA10P302A P320 CARRY OTHER OPTIC

RA10P001A P365 N/A

Slide completion kits for Sig Sauer® P320 and P365 are available from Rival Arms and include every part needed to assemble the internal workings of your new slide.

Kit Model Fit

RA42P001A P320

RA42P002A P365

Stainless steel and Tungsten High-performance guide rod assemblies are also available for the P365 and P365 XL models.

Guide Rod Model Fit Rod Material

RA50S101S P365 STAINLESS STEEL

RA50S101T P365 TUNGSTEN

RA50S111S P365 XL STAINLESS STEEL

RA50S111T P365 XL TUNGSTEN

And if you happen to have a new Taurus G3C, Rival Arms also has new tritium sights for the pistol.

Posted on

N8 Tactical Introduces Modular Kydex IWB Holster

N8 Tactical Introduces Modular Kydex IWB Holster

From N8 Tactical

N8 Tactical, an innovative holster company with a mission to provide quality products with superior comfort for all day, everyday carry, is pleased to announce the release of the company’s first all-Kydex holster called the KO-1.

N8 Tactical developed the KO-1 to provide diverse and customizable carry configurations for concealed carry practitioners who favor an IWB holster. The KO-1 starts with a one-piece Kydex pocket form-fitted to specific handgun models. The pocket’s slim design ensures minimal bulk and maximum concealment compared to conventional IWB holsters.

To customize fit and preferred carry style, the KO-1 is easily adjustable for ride height and cant. In addition to height and cant adjustment, the KO-1 can also be adjusted for retention. This system lets the user find the perfect tension for their draw style and preferred feel.

Two clip options are offered. The low-ride clip places the mounting hardware well below the waist band/belt line, allowing for shirts to be tucked inside the pants and behind the clip, as well as seating the handgun deeper into the pants. The high-ride clip mounts at the top of the Kydex pocket, positioning the pistol higher on the torso, making it ideal for untucked carry.

Further promoting fit and function is an optional Mod-Wing, which mounts behind the clip to provide outward tension on the waist band/belt. Featuring a reduced-slip contact surface, the Mod-Wing positions the handgun grip closer to the torso to minimize printing and to enhance overall stability for on-the-move carry conditions.

Introductory model compatibility for the KO-1 holster includes:

  • GLOCK 26/27,
  • GLOCK 19/19x/23
  • GLOCK 43/43x
  • Sig 320 X Compact
  • Sig 365/365XL
  • S&W M&P 4.25″
  • Shield 9mm
  • Ruger LC9
  • 1911 5″ non-railed
  • Springfield Hellcat

As with all N8 Tactical products, the new KO-1 comes with a Two-Week, Try it Free Guarantee and a lifetime warranty.

If you’re an owner of a new Taurus G3C, the company has you covered with this model, or if you’ve gone with the Springfield Hellcat, take a look at this one.   It’s latest intro is a combat cut OT2.

Posted on

Bear OPS Announces New Kimura Butterfly

Bear OPS Announces New Kimura Butterfly

From Bear OPS

Bear OPS, the professional-grade brand of knives produced by Bear & Son Cutlery, introduces a new famed Kimura butterfly knife with natural G10, the model BCC907.

Bear OPS worked with Bradley Cutlery Co.—designer and distributor of the original Kimura butterfly— to design the new Kimura butterfly knives and bring the legendary name back to market. New for 2020, Bear OPS releases the BCC907, the same quality, design and smooth flipping action the Kimura is known for, but with new natural G10 handles.

This Kimura Butterfly features a tough, 3 3/4-inch 154CM steel blade with a 58-60 Rockwell hardness, exquisite bead-blast finish, and a sturdy taper-ground edge. The handles are stainless steel 3d milled and contoured natural G10 handles for a positive ergonomic grip. Premium pivot bearings ensure smooth, “no slop” deployment from a 5 3/8-inch closed to 9-inch open length. A matching stainless-steel T-latch keeps the Kimura secure in its closed or open positions. Total weight is 6.1 ounces.

Bear OPS Kimura Butterfly Specifications

Model: BCC907

  • Blade Material: 154CM steel
  • Blade Finish: Bead finish
  • Blade Length: 3-3/4 inches
  • Edge Profile: taper-ground
  • Handle Material: stainless-steel
  • Handle Overlays: Natural G10
  • Open Length: 9 inches
  • Closed Length: 5-3/8 inches
  • Weight: 6.1 ounces
  • MSRP: $164.99

The Natural G10 Kimura Butterfly is the latest addition to Bear OPS expansive line of premium butterfly knives. The company also recently released a Titanium Pocket Knife ideal for EDC.

Posted on

The 2020 NASGW Expo Canceled

The 2020 NASGW Expo Canceled

From NASGW

The National Association of Sporting Goods Wholesalers’ Board of Directors voted unanimously to cancel the 2020 NASGW Expo that was scheduled for October in Grapevine, Texas.

NASGW leadership has been monitoring the mounting cases of COVID-19 in Texas and the expanding travel restrictions throughout the country. Despite extensive planning and precautions taken to limit risk, the health and safety of our members and the shooting sports industry is the top priority.

“As cases have continued to increase and travel restrictions are starting to expand, this decision is best for the health and safety of our members,” said Laurie Aronson, NASGW Chairwoman. “We need to protect our industry right now, and unfortunately that means canceling the NASGW Expo.”

NASGW is currently working with the hotel, convention center, and vendors regarding the cancellation. Resources for members and exhibitors will be available in the near future. NASGW is looking forward to the 2021 Expo on October 27-29 in Columbus, Ohio.

“For many in our industry, the NASGW Expo is their most productive event because it is very business focused,” said Kenyon Gleason, NASGW President. “Unfortunately, bringing people together in 2020 is not the best thing for our association, our industry, or our country. This was a very difficult decision, but one that ultimately proved the most responsible course of action.”

For current information regarding the 2020 NASGW Expo, please visit nasgwexpo.org.

Posted on

Barnaul Ammunition .300 Blackout

Barnaul Ammunition 300 AAC Blackout

Barnaul, the world’s leading manufacturer of precision steel-case ammunition, has announced availability of its premium .300 AAC Blackout ammo in the U.S.

The new Barnaul .300 AAC Blackout is offered in 145-grain FMJ with a 1,985 fps-rated muzzle velocity. Intended for high-volume target shooting and training for the increasingly popular .300 AAC Blackout AR-platform rifles and pistols, this cartridge delivers all the key features that have made Barnaul ammo the go-to choice of discerning, price-conscious shooters across two continents.

All Barnaul ammunition is built using premium steel cases and bullets manufactured at the company’s facility in Russia. An advanced, high-temperature polymer coating is applied to the steel cases to ensure flawless operation in U.S.-manufactured firearms machined to close tolerances. The polymer coating on this Barnaul ammunition will perform flawlessly even under high-temperature, full-auto conditions. Additionally, Barnaul utilizes non-corrosive powder and primers to deliver the cleanest-burning steel-case ammunition on the market today.

With retail pricing at about 1/2 the price of comparable brass cartridges,combined with flawless performance and clean operation, Barnaul ammunition is the perfect choice for shooters who enjoy long range sessions and who are looking to keep their skills sharp.

Barnaul .300 AAC Blackout Specifications

·Bullet: 145 grains, full metal jacket

·Ballistic Coefficient (G1): 0,366

·Muzzle Velocity V0 ft/sec: 1,985

·Muzzle Energy E0 J ft/lb: 1,268

·Max Powder Pressure Bar (lb/inch2): 50,763

·Cartridge Max Length: 2.15 inches

·Cartridge Average Weight: 239 grains

·Rounds per Box: 20

·Rounds per Case: 500