New Guns & Gear for 2021— K390 MICROCLEAN

New Guns & Gear for 2021— K390 MICROCLEAN

From Spyderco

Manufactured by Böhler-Uddeholm, K390 MICROCLEAN is a state-of-the-art cold work tool steel produced by the particle metallurgy process. Its advanced alloy mix was specifically developed to provide the extreme wear resistance and high compressive strength needed in industrial cutting, blanking, and punching operations.

Despite its toughness, its exceptionally fine, homogeneous microstructure also makes it readily machinable and easy to heat treat. Collectively, these qualities make K390 an outstanding blade steel. The exact alloy composition of K390 is as follows: Carbon: 2.47%, Chromium: 4.2%, Cobalt: 2.0 %, Manganese: 0.4%, Molybdenum: 3.8%, Silicon: 0.55%, Tungsten: 1.00%, and Vanadium: 9.00%. Please note that K390’s limited Chromium content makes it a true tool steel—not a stainless steel—and ensure that you care for it properly.

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—ALPS OutdoorZ Introduces Waterproof Gun Case

New Guns & Gear for 2021—ALPS OutdoorZ Introduces Waterproof Gun Case

From ALPS OutdoorZ

ALPS OutdoorZ, premiere manufacturer of extreme-duty hunting packs and gear, has developed a solution for waterfowl hunters to keep their shotguns dry and protected in the most austere climates and hunting conditions. The new Waterproof Gun Case was designed to keep shotguns clean, undamaged, and in peak operation when carried to and from waterfowl hunting blinds.

The Waterproof Gun Case is based on a rugged 500D welded PVC outer shell that is resistant to the typical punctures, abrasions, and environmental harshness typically encountered when waterfowl hunting. The interior shell is comprised of a high-density, closed-cell flotation foam, with additional protection offered by a padded liner. Sealing the gun case from water intrusion is a buckled roll-top similar to those used for expedition-grade dry bags.

To facilitate transport, the Waterproof Gun Case comes with an integrated carry handle and a removable and adjustable padded shoulder strap. A D-ring is attached to the front of the case to allow it to be hung out of the muck and water.

The Waterproof Gun Case comes in Olive Green and is sized to accommodate shotguns with barrels up to 28 inches with extended choke tubes. The total length is 58 inches unrolled and 53 inches when rolled closed. Weight is 1 lb., 9 oz.

For more information about this and other innovative hunting solutions from ALPS OutdoorZ, visit https://bit.ly/3p0PDMP

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Benelli ETHOS Cordoba BE.S.T.

New Guns & Gear for 2021—Benelli ETHOS Cordoba BE.S.T.

From Benelli

Benelli brings together the best of both style and high performance with the introduction of the ETHOS Cordoba BE.S.T. shotgun. Designed for high-volume shooting, such as dove hunting in Argentina, the ETHOS Cordoba enjoys upgraded features along with the industry leading Benelli BE.S.T. finish technology for ultimate protection from rust and corrosion.

Built to withstand thousands of rounds, the Benelli ETHOS Cordoba BE.S.T. relies on the ultra reliable Inertia-Driven operating system to deliver shot after shot without failure when the hunting heats up. The new shotgun combines the best features of a target gun with the strength of a hunting gun. Premium features such as ported barrels for quick follow-up shots and the ComfortTech recoil-reducing system to soak up recoil create a lightweight and perfectly balanced shotgun.

The front fiber-optic sight along with a mid-rib bead sit in a wide broadway sight channel to naturally lead a shooter’s eye to the target for instinctive aiming. The Shell View system with small windows in the magazine tube give instant feedback as to how many shells are loaded. The barrel and chokes are coated with Benelli’s BE.S.T. finish for protection from a shotgun’s worst enemies – rust and corrosion.

Benelli developed a hybrid PVD/PECVD machine that uses diamond-like carbon particles applied with a high-vacuum plasma nanotechnology to apply the BE.S.T. finish. The process is environmentally friendly and produces no hazardous chemical by-product while delivering a layer of high-hardness for superior abrasion and corrosion resistance. The insides of the barrels are chrome-lined for additional protection.

Benelli answered the call for a gun that can withstand punishing high-volume shooting with the lightning fast handling, featherlight weight and a soft kick for hours of enjoyment in the field. The new shotgun is available in 12 gauge, 20 gauge and 28 gauge and can handle loads up to 3-inch magnums down to the lightest 7/8-ounce loads.

Benelli ETHOS Cordoba

Gauge: 12, 20 and 28. Action: Semi-auto. Chambering: 2-3/4 and 3 inch. Barrel Lengths: 28 and 30 inches. Stock/forend: Black synthetic. Receiver: Anodized. Barrel: BE.S.T. treated Overall Length: 49.50 to 51.50 inches. Weight: 5.4 to 7 pounds. Sights: Fiber-optic front sight, mid-barrel bead. Length of Pull: 14-3/8 inches. Drop at Heel: 2-1/4 inches. Drop at Comb: 1-1/2 inches. MSRP: $2,349.

For the latest news and product information visit www.benelliusa.com.

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Timney Triggers Alpha Competition Series Handgun Triggers

New Guns & Gear for 2021—Timney Triggers Alpha Competition Series Handgun Triggers

From Timney Triggers

Timney Triggers, the oldest and largest trigger manufacturer in the world, also the leader of the aftermarket and OEM trigger industry, announced today their next chapter for the 75-year-old iconic brand – The Timney Alpha Competition Series of triggers for handguns.

First in the Alpha Series line-up is a replacement trigger for the Glock Generation 3 and 4 pistols.

With a factory pull weight of 3 pounds, the Timney Alpha Competition trigger answers the long call for a trigger that has the same feel and performance that matches the reliability of the Glock system by providing an improved trigger design that does not sacrifice any part of the Glock reliability.

Keeping up with Timney’s honored commitment to listening to their customers, the trigger can be installed easily with no gunsmith needed. With an MSRP of $164.99, Timney delivers at very competitive price point.

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Traditions Buckstalker XT

New Guns & Gear for 2021—Traditions Buckstalker XT

From Traditions

Traditions is proud to introduce for 2021 the next innovation in the popular and affordable Buckstalker line – the Buckstalker XT.

For 2021, the Buckstalker XT has been upgraded to a premium-grade Chromoly steel barrel. Chromoly steel has long been recognized as the best barrel material for strength and accuracy. This barrel will allow the Buckstalker™ XT to be lightweight yet strong and accurate. The 24” barrel will still provide accuracy of 200+ yards.

Also new this year, the Buckstalker™ XT features the Elite XT™ trigger system. This system has a precise and accurate trigger pull, along with a rebounding hammer and manual cross block trigger safety. With upgraded features, the Buckstalker™ XT represents an excellent value at a modest price.

This value-packed muzzleloader has many features including a Dual Safety System, Accelerator Breech Plug™ which removes by hand and allows for use of loose or pelletized powder, Speed Load System, and more. The Buckstalker™ XT will be available in many configurations for 2021 including G2 Vista camo or black and various finish options, as well as scoped and non-scoped versions. For those hunters in Idaho and Oregon, there is also the Traditions® Buckstalker™ XT Northwest Magnum which will feature the musket ignition, open breech, and open sights required in those states.

For more information on the Buckstalker™ XT visit https://www.traditionsfirearms.com/category/buckstalker-xt-series. Traditions® products can be found at all retail levels nationwide and on our website. For more information on all of Traditions® products, please visit www.traditionsfirearms.com.

Known for their accurate, innovative, and dependable firearms, Traditions® has a reputation of providing quality firearms for over 35 years. A leader in the industry, Traditions® offers black powder rifles and pistols, cartridge rifles and revolvers, blank pistols, Build-It-Yourself rifle and pistol kits, and cannons as well as a full line of accessories and optics. Traditions® has long been the experts when it comes to muzzleloading and has continued to expand their line up to include a wide range of products. As hunters and shooters themselves, the Traditions® team remains focused on creating quality, innovative products that make time in the field enjoyable and strive to meet the needs of their customers.

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Armscor VR82

New Guns & Gear for 2021—Armscor VR82

From Armscor

Meet the little brother of the VR80, the 20-gauge Semi Auto Mag Fed VR82 Shotgun. The new 20GA VR82 features the signature 7075 T6 Aluminum premium structure for long lasting durability and performance.

Different than its big brother, the VR82 has lightening cuts combined with 20GA 18″ barrel for a lightweight, fast handling. VR82 attributes include Ambi controls, flip up sights, barrel shroud and a forend that is compatible with most aftermarket accessories. It’s magazine fed with a 5+1 capacity.

It’s crafted from 7075 T6 aluminum and features a patent-pending BufferTHS buttstock to make it compatible with most commercial buffer tube stocks and pistol grips. The forend is also compatible with most aftermarket accessories so it can be easily customized.

Its capability and versatility proves that big things come in smaller packages.

MSRP: $729

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—CRKT to Release Next Generation of Field Strip Technology

New Guns & Gear for 2021—CRKT to Release Next Generation of Field Strip Technology

From CRKT

In 2008, Ken Onion and CRKT unveiled Field Strip Technology. The first of its kind, this revolutionary innovation made it possible to disassemble your knife easily, without tools. It quickly grabbed the attention of the knife community and became a decorated, award-winning design.

Enter the next generation: It’s simpler to use than ever before. Reinvented with one-handed slide lever releases and the IKBS™ ball bearing pivot system, Field Strip Gen II is bound to live up to its name.

In the new 2021 lineup, the Bona Fide™ and the Cottidae™ both feature Field Strip Gen II. The Bona Fide™ is Ken’s own creation—he designed the three-knife line (the Bona Fide™, the Bona Fide™ With S35VN Blade Steel, and the Bona Fide™ OD Green) to pay homage to his Hawaiian roots with a handle crafted to look like a traditional Hawaiian wa’a or canoe.

The Cottidae™ is a design created by Jesper Voxnaes to be a compact, stout mechanic’s knife. It’s crafted to be the ideal tool for scraping gaskets, slicing open boxes, and easily coming apart for simple cleaning when grease starts to slow it down.

This is innovation. This is Field Strip Gen II.

HOW FIELD STRIP GEN II WORKS

Slide the lever up to disassemble, easily releasing the knife into three components. Place the blade between the two handles in the closed position and slide the lever down to reassemble.

Keep an eye out for the full lineup of new Field Strip Gen II knives in the CRKT® 2021 release.

PRODUCT SPECIFICATIONS

Bona Fide™ Silver

SKU:               K540GXP

Blade:             Length: 3.59″ (91.19 mm)

                        Edge: Plain

Steel: D2

Finish: Satin

                        Thickness: 0.13″ (3.38 mm)

Closed:                        4.66” (118.34 mm)

Open:              8.25” (209.55 mm)

Weight:                                   4.3 oz (121.90 g)

Handle:                       Aluminum

Style:                          Folding Knife w/Liner Lock

The Bona Fide™ Silver manufacturer’s suggested retail price is $99.99

Bona Fide™ OD Green

SKU:               K542GKP

Blade:             Length: 3.59″ (89.28 mm)

                        Edge: Plain

Steel: 1.4116

Finish: Satin

                        Thickness: 0.13″ (3.38 mm)

Closed:                        4.66” (118.34 mm)

Open:              8.19” (207.98 mm)

Weight:                       4.3 oz (119.07 g)

Handle:           Aluminum

Style:              Folding Knife w/Liner Lock

The Bona Fide™ OD Green manufacturer’s suggested retail price is $99.00

Bona Fide™ with S35VN Blade Steel

SKU:               K541TS35P

Blade:             Length: 3.55″ (90.25 mm)

                        Edge: Plain

Steel: S35VN

Finish: Satin

                        Thickness: 0.13″ (3.38 mm)

Closed:                        4.66” (118.34 mm)

Open:              8.19” (207.98 mm)

Weight:                       5.1 oz (144.58 g)

Handle:                       Aluminum

Style:                          Folding Knife w/Liner Lock

The Bona Fide™ with S35VN Blade Steel manufacturer’s suggested retail price is $250.00

Cottidae™

SKU:               6321

Blade:             Length: 2.61″ (66.29 mm)

                        Edge: Plain

Steel: D2

Finish: Satin

                        Thickness: 0.13″ (3.38 mm)

Closed:                        3.78″ (96.04 mm)

Open:              6.38″ (161.93 mm)

Weight:                       3.3 oz (93.55 g)

Handle:           Aluminum

Style:              Folding Knife w/Liner Lock

The Cottidae™ manufacturer’s suggested retail price is $89.99

Founded in 1994, CRKT® is the industry’s premier brand of knives, tools, and lifestyle accessories, with a reputation for innovative design. For more information, call: (800) 891-3100, email: [email protected], on the web: www.crkt.com

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Streamlight TLR-7 Sub Weaponlight

From Streamlight

Streamlight Inc., a leading provider of high-performance lighting and weapon light/laser sighting devices, introduced the ultra-compact and low profile TLR-7® sub, a weapon-mounted tactical light with an ergonomic on/off position rear switch. It is available to fit select GLOCK®, SIG SAUER®, Smith & Wesson®, Beretta®, Springfield Armory® and Heckler & Koch® railed subcompact handguns.

“The latest addition to our popular line of TLR-7 weapon lights is an extremely compact and low profile model that can be mounted on railed subcompact weapons,” said Streamlight President and Chief Executive Officer Ray Sharrah. “Like other models in the line, it has a high power LED that provides extreme brightness for maximizing visibility and targeting capability in personal defense and other tactical situations. And its rear switch on the left and right of the trigger guard allows for ambidextrous operation.”

The new light is available in three different models to fit the GLOCK® 43X MOS/48 MOS and the GLOCK® 43X RAIL/48 RAIL, with slim mounting rails; the SIG SAUER® P365® and the SIG SAUER® P365® XL; and select 1913 short railed subcompact handguns including the Smith & Wesson® M&P® M2.0™ Subcompact, Beretta® PX4 Storm Compact/Subcompacts, Springfield Armory® XD-E™, Springfield Armory® XD-S® and Heckler & Koch® HK45 compacts. 

The TLR-7 sub features an LED that delivers 5,000 candela and 500 lumens over a beam distance of 141 meters. Its custom TIR optic produces a concentrated beam that provides both extensive range as well as optimized peripheral coverage. It offers two lighting modes, LED only or LED strobe, each with a run time of 1.5 hours. The light is energized by a single 3 Volt CR123A lithium battery.

The new TLR-7 sub features a one-handed, snap on and tighten interface that keeps hands away from gun muzzles when attaching or detaching them. The light also includes a Safe Off feature, locking it so it cannot be turned on accidentally. Each model of the TLR-7 sub features a specialized clamp system for mounting to rails, using the provided key kit.

Constructed with 6000 Series machined aircraft aluminum with a black anodized finish, the TLR-7 sub weighs 2.39 ounces and measures 2.51 inches in length. It features an IPX7-rated design, making it waterproof to one meter for 30 minutes, as well as impact-resistant construction.

The TLR-7 sub has an MSRP of $225.75, and comes with Streamlight’s Limited Lifetime Warranty

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Uberti Hardin and Teddy Replica Revolvers to Their Famed Outlaws & Lawmen Series

New Guns & Gear for 2021—Uberti Hardin and Teddy Replica Revolvers to Their Famed Outlaws & Lawmen Series

From Uberti

The history of the Old West pitted heroes and gunfighters against each other in a fight for control of the expanding frontier. Uberti USA celebrates this duality with the addition of the Hardin and Teddy replica revolvers to the Outlaws & Lawmen Series. The two new guns join Uberti USA’s homage to famous heroes and gunfighters such as Jesse James, Frank James, Doc Holliday, Bob Dalton, Wild Bill Hickok and William “Billy the Kid” Bonney. 

After reportedly killing his first man at aged 15, John Wesley Hardin spent the rest of his life being pursued by lawmen. Hardin sewed his holsters into his vest with the butts of the pistols pointing inwards so he could quickly pull them with a cross draw, which Hardin claimed was the fastest way to draw. Uberti USA’s Hardin revolver follows the lines of his S&W top-break revolver.

Aesthetically, the Hardin revolver’s contrast of case-colored frame against the charcoal blue barrel and cylinder along with a simulated bison-horn grip gives the gun a unique look that draws the eye. Chambered in .45 Colt, the Hardin features a 7-inch barrel and fluted cylinder for an authentic styling reminiscent of the glory days of the Old West.

Theodore “Teddy” Roosevelt wore many hats throughout his lifetime, including hunter, conservationist, military officer and the 26th U.S. President. Frequently along with him on his adventures and service, his beloved Colt revolver was close at hand. The Uberti USA Teddy revolver faithfully replicates Roosevelt’s beloved 1873 Colt.

The gun features full laser engraving along the frame, cylinder and barrel. Fully nickel plated, the revolver’s look is complemented by simulated ivory grips for a striking appearance. Chambered in .45 Colt, the Teddy is durable as it is beautiful and embodies a true American hero who lead a life full of adventure.

Uberti USA Outlaws & Lawmen Series Extension

Hardin – S&W Top-break. Caliber: .45 Colt. Barrel Length: 7 inches. Overall Length: 12.8 in. Overall Weight: 2.6 lbs. Grip: Two-piece simulated bison horn. Finish: Case-colored. Cylinder: 6-shot, case-colored. Number of Grooves: 6. Rate of Twist: 1:16, RH. Warranty: 5 years. MSRP: $1,479.

Teddy – 1873 Colt. Caliber: .45 Colt. Barrel Length: 5.5 inches. Overall Length: 11 in. Overall Weight: 2.3 lbs. Grip: Simulated ivory. Finish: Nickel plated. Cylinder: 6-shot, nickel plated. Number of Grooves: 6. Rate of Twist: 1:16, RH. Warranty: 5 years. MSRP: $1,249.

For more information on the full line of Uberti USA products go to www.uberti.com.

And don’t forget to check out my growing list of the best new guns and gear of 2021.

New Guns & Gear for 2021—Franchi Momentum Rifle Line Expands and Now Available in .350 Legend

New Guns & Gear for 2021—Franchi Momentum Rifle Line Exands and Now Available in .350 Legend

From Franchi

Franchi now offers a new color option to its line of Momentum rifle line and also addresses certain states’ hunting regulations requiring straight-walled centerfire cartrides with the addition of the Momentum chambered in .350 Legend. The latest offering joins three popular calibers in the Momentum line including 6.5 Creedmoor, .308 Win. and .300 Win. Mag.

The most visually distinct feature of the Momentum rifle is its revolutionary stock. The stock combines raised curves and crisp checkering at strategic places along the rifle, delivering the most ergonomic feel and positive hold in the five most commonly used shooting positions. Sling-attachment points are recessed on the Momentum’s stock, eliminating the need for intrusive swivel studs. At the butt, the Franchi’s popular TSA recoil pad absorbs 50 percent of the rifle’s felt recoil with integrated contours to offer more comfortable benchrest shooting positions.

Momentum’s barrel is a cold-hammer-forged chrome-molybdenum with a matte finish and free floated for enhanced accuracy. The ends of the threaded-barrel configurations (5/8 x 24 thread) are protected by a knurled cover that is easy to remove when utilizing barrel accessories or supressors. The Momentum features a two-position safety, which allows the bolt to be operated when the rifle has been made safe. Franchi’s proprietary RELIA Trigger delvers a crisp break and can be adjusted from 2 to 4 pounds.

The rifle’s RELIA Bolt features a one-piece, spiral-fluted bolt with three locking lugs for solid lockup to deliver increased accuracy. The bolt has a short, 60-degree throw for faster cycling and is easy to disassemble when cleaning. Offering 4+1 capacity (3+1 for .300 Win. Mag.), the Momentum sports a hinged floorplate magazine.

The Momentum rifle chambered in 6-5 Creedmoor, .308 Win. and .300 Win. Mag. are now available in Hunter Gray along with Flat Dark Earth. The new chambering in .350 Legend will be available in Flat Dark Earth only.

Franchi Momentum Bolt-Action Rifle

Rifle Only/Threaded Barrel Standard Features – Stock/Finish: Hunter Gray, Flat Dark Earth. Trigger: Adjustable (2-4 lbs.). Barrel: Free-floating/threaded (5/8×24 threads). Capacity: 4+1 (.300 Win. Mag 3+1). Length of Pull: 14 inches. Warranty: 7 years. MSRP: $609

New Caliber

.350 Legend – Barrel Length: 24 inches. Overall Length: 44.25 inches. Overall Weight: 7.1 lbs. Rate of Twist: 1:16 RH

Existing Calibers in New Hunter Gray

6.5 Creedmoor – Barrel Length: 24 inches. Overall Length: 44.25 inches. Overall Weight: 6.7 lbs. Rate of Twist: 1:8 RH

.308 Win. – Barrel Length: 22 inches. Overall Length: 44.25 inches. Overall Weight: 6.3 lbs. Rate of Twist: 1:11 RH

.300 Win. Mag. – Barrel Length: 24 inches. Overall Length: 44.3 inches. Overall Weight: 6.7 lbs. Rate of Twist: 1:11 RH

Visit https://www.franchiusa.com/momentum .

And don’t forget to check out my growing list of the best new guns and gear of 2021