Lewis Machine & Tool SLK8

Lewis Machine & Tool SLK8

Urban legend has it 3-gun match directors sprouted from Attila the Hun’s branch of Genghis Kahn’s family tree. It’s a sadistic breed that takes pleasure in pain. They pray for rain, and then insist on seeing video from the stage that required engaging steel at 200 yards—from the prone position in knee-deep mud. Long hours are invested in finding barricades more prickly than the desert Southwest’s jumping cactus. They have a direct hotline to Kentucky’s Kevlar clays company.

It makes for a great story line, but the tongue-in-cheek scuttlebutt is wrong. New shooters receive more help than they thought possible and nearly all describe their first experience as an addictive adrenaline rush. The only grain of truth to the rumor is how much delight match directors take in designing safe stages that test guns, gear and shooter every manner possible. Add the fact that there’s often more than one way to shoot each course of fire, and that imaginative, marksman’s version of a chess game has made 3-gun the fastest-growing shooting sport.   

In 3-Gun Nation’s club series, “Run what you brung” is an oft-heard phrase, one validated by the number of people who have fought their way onto the organization’s professional tour with stock guns from their safe. But, once a shooter gets serious about shaving seconds off his or her time (yes, there is a woman’s tour, too), gear takes on an all-new meaning. Springs fail, magazine feed lips bend, scope mounts break and sights disappear. The worst I’ve witnessed, first hand, was last year when a shooter’s AR-15 upper receiver suffered a catastrophic failure. Cartridges, springs, flames and various metal parts screamed from the hole once occupied by a magazine. Guns are run hard, and if you want to be competitive you don’t back off in adverse conditions.

Out of Place?

When Lewis Machine & Tool introduced its new SLK8 for 3-gun, some claimed it was a departure from the norm for the Milan, IL-based company.  Established in 1980, it designs, prototypes and manufactures small arms, their accessories and tooling components for the military, law enforcement and civilian markets.  In 2005, at a time when most shooters didn’t recognize its name, the firm issued a press release labeling itself “The Quiet Gun Maker.” Then it landed a contract with the United Kingdom Ministry of Defence in 2009 to supply Britain’s sharpshooters in Afghanistan with its 7.62 NATO-chambered LM308MWS, and people took notice. While the U.S. retrofitted and reissued M14s for long-range, mountaintop engagements, the Brits purchased AR-10s built in the Colonies. The gun first saw combat in April 2010.

And when it comes to the aluminum used in AR construction, my interview with experts in the field explains a lot.

Frontline deployments are not firearm friendly—one of the main reasons the decision to stick with the time-proven M14 was a good one. Guns get dropped, barrels slammed against doors and optics banged. Add an occasional sandstorm, rain, snow, abuse, neglect, bugs, mud and blood and if the U.K. has already purchased more than 3,000 Lewis Machine & Tool rifles for the Sandbox, the rifle is terrorist-slaying reliable.

The sport of 3-gun isn’t the same 24/7, 365-days-a-year returning-fire marathon as a deployment, but the guns and gear take a beating. With an established track record in the hands of those who go in harm’s way, the company’s entry into the competition market seems a natural evolution, and the same virtue serves shooters well in regard to self-defense.

Monolith

The SLK8 has a monolithic upper machined from a solid aluminum forging. Handguards not integral with the receiver have been known to work their way loose or shift slightly. It might not result in a stoppage, but one bang on a door during an entry could alter point of aim on rail-mounted lasers or backup iron sights. Those hard knocks are reality in combat, inevitable in 3-gun and likely in self-defense—so Lewis Machine & Tool’s stable upper is a welcome advantage.

There are 18 1/2 inches of useable and unjointed rail space atop the receiver/handguard. Numbers on alternating grooves make it easier to index and reposition optics anchored there.

As shipped from the factory, the 6- and 9-O’clock positions on the handguard are smooth and do not have Picatinny rails mounted. However, low-profile and removable polymer covers protect threads underneath that can be used to install rails at desired positions, and there are 9 1/2 inches of fore-and-aft movement possible for anchoring on all sides.

At the 3-O’clock position a small, 1 3/8-inch rail (3 grooves) comes pre-installed at the front. Another textured polymer cover protects those unused threads toward that side’s receiver.

Lewis Machine & Tool provides four other sections of its rail with the gun, which allows shooters to customize their setup the moment they bring it home. They measure 1 3/8, 2 1/8, 3 and 3 3/4 inches. Six different-sized polymer inserts are also included, allowing the protection of unused handguard threads.

Overall, the octagonal-shaped handguard is sleek and fast. Its outside diameter measures 1.52 inch (from 3 to 9 O’clock)and the slight texturing on the polymer covers provides extra purchase, a welcome addition during sweaty range sessions. In testing, there was no perceptible heat, sans the 4 1/4 inches of barrel and flash hider exposed up front. The configuration lends itself to a popular 3-gun technique in which the support hand is far forward, and when the only support available is an ancient barricade, posing as a porcupine, you’ll appreciate the increased real estate.

Quick-detach swivel-mounting points are found at the front of the handguard at the 3-, 6- and 9-O’clock positions. Another is at the back, above the barrel-locking bolts on the left side.   

Floated

That, of course, leads to one of the carbine’s most unusual features. Lewis Machine & Tool was among of the first to develop fast-barrel swaps in its rifles—thanks in part to that massive MRP upper receiver—and it didn’t abandon the feature in this direct-gas-impingement, 5.56 NATO-chambered SLK8. It starts with full free floating.

Removal is crazy easy. The company even provides one of its new torque wrenches with the gun.

Let the rifle cool before you begin, make it safe and take out the bolt-carrier group. Loosen and remove the forward barrel-locking nut using the included T-30 Torx wrench. Then turn the second bolt—the one closest to the receiver—at least three full, counterclockwise rotations. Full removal is not necessary on this bolt.

The barrel and pinned gas block can then be slide out the front of the handguard, slowly. The gas tube remains, so be careful not to bang things around a lot.    

To reinstall, first make sure the gas tube is at the 12 O’clock position, then insert the barrel and attached gas block. Ensure it is solid in the receiver and gas assembly is correct. Tighten the front bolt to 140-inch pounds and do the same to the second bolt. The ease of this operation makes compatible chambering swaps fast and quick—6.8 SPC barrels, for example, are available from Lewis Machine & Tool in 18-, 16- and 12 1/2-inch versions.

The SLK8’s stock barrel has 5R rifling, a design that features slightly angular lands. Obermeyer Barrels developed this particular type of rifling, and lists its chief advantage as reduced powder fouling in the grooves. In addition, jacketed bullets exiting tubes with this feature engrave more accurately. The match-grade barrel has five grooves, with a right-hand twist of one rotation every 7.5 inches, ideal for 3-gun according to the company. The tested gun’s version had a stainless finish, but a flat-black option is also available from Lewis Machine & Tool.

Low Down

At the bottom end, the company’s Afghanistan-proven LM308MWS Defender lower receiver completes the carbine. Fire controls are ambidextrous, but the mag release is not. Other features are standard on most AR-15s; forward assist, dust cover and bolt-release.

Things work loose when guns are subjected to the rigors of competition, which makes the decision to go with the company’s LMP2400 trigger—a match-grade, non-adjustable, two-stage version—a wise move. In testing, resets were palpable and audible. Let off weight averaged 7 pounds with slight stacking. It’s great for competition or home-defense, but will take some time to get accustomed to if ringing steel at 350 yards is your thing.

At the rear is Lewis Machine & Tool’s SOPMOD buttstock. The company is the sole provider of these to the U.S. Special Ops Command, as well as the Marine Corps, Army, Navy and Air Force. Both sides of the six-position-adjustable stock have quick-detach swivel mounts. Dual, watertight front-facing battery compartments can hold up to four CR-123s each. The recoil pad made me scratch my head for a while, until I realized it was probably standard equipment on the 7.62 NATO version dispatched to the Sandbox. It’s not tacky enough hang up on gear, though.

The pistol grip is a company exclusive manufactured by Ergo Grips. It’s sticky, grooved at the front to anchor your finger and works well. The LMT logo is at the bottom of the unit.

Leftovers

The gun comes with the company’s LMP103T charging handle, and it was a welcome addition after mounting a trusted Leupold VX2 3-9×40 mm on it testing. I couldn’t get a good grip on the right side once the optic was aboard, but the tactical latch to the left was easy to grasp by simply rolling my finger down. 

A fairly standard A2 flash hider rides the barrel up front. On the test gun its flat black finish provided nice contrast with the barrel’s stainless finish. It’s probably not very functional for 3-gun shooters or home defense, but it does protect those threads nicely until you upgrade to a brake or suppressor. 

Lewis Machine & Tool also includes a lot of spare gear for the end user, and that’s a nice touch. The included sling, well, let’s just say it might not stick around long.

Give Me Three, Please

I chronographed each of the loads the first day with a metal magazine I grabbed off my desk. There were no failures to feed or stoppages of any kind. The bolt always held open on an empty chamber and the mag drops were effortlessly free and clear.

Accuracy testing the next day was a different story. I opened and used the company-provided magazine (also metal). The bolt held open when empty and drops were clean, but the third round in every reload stovepiped—always the third. I tapped, shook and cast an ancient gypsy juju spell, but the results were always the same with each  load, twice. So I reverted back to the other magazine to finish testing. The problems didn’t recur. Magazines fail, but not usually one just removed from its sealed packaging.  

There is some really good news. I had so many four-shot groups touching or going through pretty much the same hole it was hard to put the gun down. Unfortunately, there’s always that one wayward shot. The rifle preferred American Eagle’s budget-conscious 55-grain, .223 Rem. jacketed hollowpoint load. Average group size would trim down to slightly higher than 6/10th of an inch if the editors allowed me a golfing “gimme” every five shots. This SLK8 is capable of much more than I wrung out of it that day, and I’m confident precision shooters who take one home will quickly scoff at my group averages.

The handguard did a great job shielding my hands, and despite not cleaning during testing, groups did not widen appreciably. I ran through a few CQB drills and this rifle is nimble as expected. And all I can say is, what recoil? Follow-up shots were fast and almost intuitive.

Summing it Up

There was a time in 3-Gun when long barrels were thought requisite to connect with long-distance steel. However, most matches don’t have access to ranges with 300- or 400-yard bays, and even when they do they’re rarely used. As a result, many shooters are gravitating toward shorter barrels—the U.S. Army Marksmanship Unit and a few others now routinely use SBRs.   

The same kind of logic lends itself to self-defense situations. Long barrels are hard to swing around corners—they’re slow, easy to spot and even grab. Nimble, light and reliable carbines are the answer. You’re not going to be engaging bad guys a football field away, but you may be stopping an armed robber at 10 yards, while moving, shooting and taking cover.

The Lewis Machine & Tool SLK8 is pricey, but it’s got the kind of heritage you can trust. It tested extremely well, and whether you find yourself knee deep in muck on a muddy stage, or caught up in the wet work of neutralizing a half dozen home-invading druggies, it’s a rifle upon which you can rely. And that’s the most important attribute of any self-defense gun. Buy an extra Pmag, though, just in case.   

Lewis Machine & Tool SLK8 Shooting Results

Load                                                    Average Five-Shot Group

American Eagle 50-grain JHP                             .95

Federal Match 69-grain Sierra MatchKing    1.13

Hornady 55-grain VMAX                   1.21

Lewis Machine & Tool SLK8 Specs

Manufacturer: Lewis Machine & Tool

Action Type: Direct-gas-impingement, semi-automatic

Caliber: 5.56 NATO

Capacity: 30 rounds

Barrel Length: 16 inches

Rifling: 5 grooves, 1:7.5-inch RH twist

Sights: None, Picatinny rail for mounting optics

Trigger Pull Weight: 7 pounds

Buttstock: Polymer SOPMOD, six-position adjustable

Length: 32 7/8 inches (collapsed), 36 1/4 inches (extended)

Weight: 7.75 pounds

Accessories: Sling, rail segments, rubberized grip panels, two push-button swivels, sling, owner’s manual, torque wrench and Torx head

MSRP: $2,405